Neutral cleaners

Cleaning agents normally are water solutions which may be acidic, alkaline or neutral depending on use.

 

Viscous formulas or gel cleaners are particularly useful for cleaning vertical surfaces. Gel cleaners also tend to be chosen for applications where the agent will be left to work for an extended period of time. For neutral cleaners (pH 6-8), Tylose® is ideal for thickening and adjusting the rheology. With Tylose®, manufacturers can achieve the desired look and a specific processing consistency for their cleaning agent.

 

Medium viscosity Tylose® H and MH grades are very well suited to thicken cleaners as they are largely clearly soluble, have a good level of compatibility with ionic surfactants and can easily be incorporated into the cleaner, due to their delayed solubility. Good storage stability will also be achieved.

Tylose Grades
Product Characteristic  
Fact Sheet
H 10000 NG4
Thickening : moderate
H 4000 NG4
Thickening : moderate
MH 4000 KG4
Thickening : moderate

Personal and home care

Personal and Home Care

In Personal and Home Care formulations the most important properties of Tylose® are thickening effect, respectively consistency regulation, stabilisation and high compatibility

with other ingredients such as surfactants.

» More information

Nomenclature Information

M
H
O
A
X



B
F
S
T
Type of ether
Methyl
Hydroxyethyl
Hydroxypropyl
Allyl
Hydrophobe
etherification

Degree of
etherification
Special higher
degrees of
etherification,
depending on the
individual type of
ether

60000
30000
15000
10000
6000
4000
2000
1000
300
200
.
.
.
01
02
03
04
.
.
.
Viscosity level
The viscosity level
is based on
Hoeppler: 2%
solution of the
commercial product
with 5% moisture
content, 20ºC,
20º dH
(German hardness)








Consistency
increasing
modification
The least one of
the two last
digits is a
number > 0

Y
K
N




G4
G6
G8

P2
P3
P4
P6
Chemical refinement
Delayed solubility products
Readily soluble granules
non-delayed solubility products
(only for Tylose H grades) *

Degree of particle size
Types of granules:
Granules (< 500 μm)
Granules (< 400 μm)
Granules (< 300 μm)
Powder types:
Powder (< 180 μm)
Fine Powder (< 125 μm)
Fine powder (< 125 μm)
Ultra fine powder (< 100 μm)
* Tylose MH and MO Grades are not explicitly marked by ”N”, even if these products are ”non-delayed solubility products”.
TabTop