Tylose® H 30000 YP2

Product properties
Constitution:
Hydroxyethyl cellulose
Appearance:
powder
Etherification:
normal
Particle size:
powder
Delayed solubility:
yes
Level of viscosity:
according to Höppler
30000 mPa•s
Tylose® H grades - water soluble, non-ionic, hydroxyethyl cellulose with standard etherification

Application performance
Ceramic applications
Thickening effect:
moderate
Plasticity:
very good
Temperature stability:
very good
Binding effect:
good
Coating materials
Biostability:
no
Gloss:
high
Pigment Compatibility:
high
Anti-spattering:
moderate
Pseudoplasticity:
moderate
Thickening effect:
high
Wet scrub resistance:
moderate
Water retention:
high
Personal and home care
Thickening effect:
high
Higher purity:
no
Clarity of the solution:
high
Stabilization of foam:
moderate
Pseudoplasticity:
moderate
Compatibility with salts:
high
Compatibility with surfactants:
high
Recommended fields of application
Ceramic applications
Engobes & glazes
Coating materials
Exterior paints
Silicate paints
Silicone resin paints
Further applications
Welding rods
Personal and home care
Hair conditioner
Shampoo
Nomenclature Information

M
H
O
A
X



B
F
S
T
Type of ether
Methyl
Hydroxyethyl
Hydroxypropyl
Allyl
Hydrophobe
etherification

Degree of
etherification
Special higher
degrees of
etherification,
depending on the
individual type of
ether

60000
30000
15000
10000
6000
4000
2000
1000
300
200
.
.
.
01
02
03
04
.
.
.
Viscosity level
The viscosity level
is based on
Hoeppler: 2%
solution of the
commercial product
with 5% moisture
content, 20ºC,
20ºdH
(German hardness)








Consistency
increasing
modification
The least one of
the two last
digits is a
number > 0

Y
K
N




G4
G6
G8

P2
P3
P4
P6
Chemical refinement
Delayed solubility products
Readily soluble granules
non-delayed solubility products
(only for Tylose H grades) *

Degree of particle size
Types of granules:
Granules (< 500 μm)
Granules (< 400 μm)
Granules (< 300 μm)
Powder types:
Powder (< 180 μm)
Fine Powder (< 125 μm)
Fine powder (< 125 μm)
Ultra fine powder (< 100 μm)
* Tylose MH and MO Grades are not explicitly marked by ”N”, even if these products are ”non-delayed solubility products”.
TabTop