Cement render

Base renders are used to coat walls and ceilings. They form the substrate for further coatings such as decorative finish coatings and tiles. Cement based base renders can be used internally and externally. In formulations for exterior renders the addition of hydrophobic agents is also recommended.

 

The use of Tylose® MC ensures the necessary water retention, workability, and sag resistance. Additives such as air entraining agents, starch ethers, and water-repelling agents can be added for further optimisation.

Tylose Grades
Product Characteristic  
Fact Sheet
MH 15002 P6
Final consistency : moderate
MH 60010 P4
Final consistency : high
MHS 30027 P6
Final consistency : moderate

Building materials

Building materials

Tylose® is an essential component in many building materials. The cellulose ether is mainly responsible for water retention, consistency and adhesion. The homogeneity, stability and workability of mortars are improved by the use of Tylose. Using Tylose enables the manufacturing of modern and efficient construction materials, such as machine plasters and thin bed adhesives.

» More information

Nomenclature Information

M
H
O
A
X



B
F
S
T
Type of ether
Methyl
Hydroxyethyl
Hydroxypropyl
Allyl
Hydrophobe
etherification

Degree of
etherification
Special higher
degrees of
etherification,
depending on the
individual type of
ether

60000
30000
15000
10000
6000
4000
2000
1000
300
200
.
.
.
01
02
03
04
.
.
.
Viscosity level
The viscosity level
is based on
Hoeppler: 2%
solution of the
commercial product
with 5% moisture
content, 20ºC,
20º dH
(German hardness)








Consistency
increasing
modification
The least one of
the two last
digits is a
number > 0

Y
K
N




G4
G6
G8

P2
P3
P4
P6
Chemical refinement
Delayed solubility products
Readily soluble granules
non-delayed solubility products
(only for Tylose H grades) *

Degree of particle size
Types of granules:
Granules (< 500 μm)
Granules (< 400 μm)
Granules (< 300 μm)
Powder types:
Powder (< 180 μm)
Fine Powder (< 125 μm)
Fine powder (< 125 μm)
Ultra fine powder (< 100 μm)
* Tylose MH and MO Grades are not explicitly marked by ”N”, even if these products are ”non-delayed solubility products”.
TabTop